-
Home
- About Huaqiu
- Relay System
- Product System
-
Portable Fire Pump
-
Forest fire pump
-
Floating boat pump
-
Water Mist Fire Pump
-
Fire Nozzle
-
Customized Series
- News
- Contact Us
Classify- Worry-free Service
- Routine Maintenance
- Frequently Asked Questions
Routine Maintenance
Daily Maintenance
Maintenance and Inspection
1. Place the fire pump on a dry flat surface. High humidity can corrode steel components and cause rust.
2. Keep the fire pump clean.
3. Maintain full fuel in both the fuel tank and oil tank at all times.
4. Keep the vacuum pump oil cup at the appropriate oil level.
5. Test-run the pump at least once a month.
6. Check the battery monthly.
7. If the fire pump is stored for more than one month, drain all fuel from the carburetor.
8. Replace spark plugs if dirty or worn. Recommended model: NGK F7TC
9. Immediately replace the vacuum pump V-belt if cracked or worn.
Regular Inspection
Perform regular inspections and maintenance according to the following procedures:
Inspection Item Inspection Time and Cycle Inspection Points Measures Fuel After each operation Fuel level in tank Refill Engine Oil After each operation Oil levels in vacuum pump and oil tank Refill Electrical equipment (lights, etc.) After each operation Functionality (lighting) Replace if defective Carburetor Fuel Line Every 50 hours or 3 months Carburetor float condition Clean or replace Battery Monthly Voltage level Recharge if necessary Starter Rope Monthly Wear condition Replace if worn Spark Plug Every 50 hours or monthly Dirt, damage, or excessive gap Clean or replace Fuel System Every 50 hours or monthly Clogged filters or leaks Replace defective parts Pump Regularly Operating condition Replace if necessary Water Outlet Valve Every 50-100 hours Vacuum leaks Replace if leaking V-Belt Every 100 hours or annually Wear or breakage Replace if damaged All Components Every 300 hours or 3 years Comprehensive inspection Replace worn parts as needed Maintenance and Inspection
1. Place the equipment on a dry flat surface. High humidity can corrode steel components and cause rust.
2. Keep the fire pump clean.
3. Maintain full fuel in both the fuel tank and oil tank at all times.
4. Keep the pump oil cup at the appropriate oil level.
5. Test-run the pump at least once a month.
6. Check the battery monthly.
7. If the fire pump is stored for more than one month, drain all fuel from the carburetor.
8. Replace spark plugs if dirty or worn. Recommended model: NGK F7TC
Regular Inspection
Perform regular inspections and maintenance according to the following procedures:
Inspection Item Inspection Time and Cycle Inspection Points Measures Fuel After each operation Fuel level in tank Refill Engine Oil After each operation Oil level in engine tank Refill Electrical equipment (lights, etc.) After each operation Normal operation Inspect and repair Carburetor Fuel Line Every 50 hours or 3 months Carburetor float condition Clean or replace Battery Monthly Fluid level Recharge if necessary Starter Rope Monthly Wear condition Replace if worn Spark Plug Every 50 hours or monthly Dirt, damage, or excessive gap Clean or replace Fuel System Every 50 hours or monthly Clogged filters or leaks Replace defective parts Transmission Oil Every 50 hours or monthly Operating condition Replace if necessary Pump Every 50-100 hours Oil level check Add oil if necessary High-Pressure Hose Reel Every 100 hours or annually Connections and hoses Replace if damaged All Components Every 300 hours or 3 years Comprehensive inspection Replace worn parts as needed Maintenance and Inspection
1. Keep the fire pump clean.
2. Maintain full fuel in both the fuel tank and oil tank at all times.
3. Test-run the pump at least once a month.
4. Check the battery monthly.
5. If the fire pump is stored for more than one month, drain all fuel from the carburetor.
6. Replace spark plugs if dirty or worn. Recommended model: NGK F7TC
Regular Inspection
Perform regular inspections and maintenance according to the following procedures:
Inspection Item Inspection Time and Cycle Inspection Points Measures Fuel After each operation Fuel level in tank Refill Engine Oil After each operation Oil level at dipstick Refill Carburetor Fuel Line Every 50 hours or 3 months Carburetor float condition Clean or replace Battery Monthly Fluid level Replenish if necessary Starter Rope Monthly Wear condition Replace if worn Spark Plug Every 50 hours or monthly Dirt, damage, or excessive gap Clean or replace Fuel System Every 50 hours or monthly Clogged filters or leaks Replace defective parts Pump Regularly Operating condition Replace if necessary All Components Every 300 hours or 3 years Comprehensive inspection Replace worn parts as needed Maintenance and Inspection
1. Under normal conditions, regularly flush the nozzle with clean water to remove sand and dirt;
2. Periodically check the baffle screws to ensure they are secure;
3. Inspect the nozzle before and after each use to ensure it is in good working condition.
Maintenance and Inspection
1. Place the fire pump on a dry flat surface. High humidity can corrode steel components and cause rust.
2. Keep the fire pump clean.
3. Maintain full fuel in both the fuel tank and oil tank at all times.
4. Keep the gearbox at the appropriate oil level.
5. Test-run the pump at least once a month.
6. Check the battery monthly.
7. If the fire pump is stored for more than one month, drain all fuel from the carburetor.
8. Replace spark plugs if dirty or worn.
9. Immediately replace the vacuum pump V-belt if cracked or worn.
Regular Inspection
Perform regular inspections and maintenance according to the following procedures:
Inspection Item Inspection Time and Cycle Inspection Points Measures Fuel After each operation Fuel level in tank Refill Engine Oil After each operation Oil levels in vacuum pump and oil tank Refill Electrical equipment (lights, etc.) After each operation Functionality (lighting) Replace if defective Carburetor Fuel Line Every 50 hours or 3 months Carburetor float condition Clean or replace Battery Monthly Voltage level Recharge if necessary Starter Rope Monthly Wear condition Replace if worn Spark Plug Every 50 hours or monthly Dirt, damage, or excessive gap Clean or replace Fuel System Every 50 hours or monthly Clogged filters or leaks Replace defective parts Pump Regularly Operating condition Replace if necessary Water Outlet Valve Every 50-100 hours Vacuum leaks Replace if leaking V-Belt Every 100 hours or annually Wear or breakage Replace if damaged All Components Every 300 hours or 3 years Comprehensive inspection Replace worn parts as needed -
Phone
Tel:
0575-87062288
-
WeChat
-
Back to Top
Contact Us-
Office Phone:+86-575-87062288
-
After-sales Hotline:400-8585-119
-
Corporate Email:hqjxzz@163.com
-
Office Address:
No. 91 Xueyuan Road, Yaojiang Town, Zhuji City, Zhejiang Province
WeChat Official AccountCopyright © 2025 Zhejiang Huaqiu Fire Fighting Equipment Co., Ltd. All Rights Reserved.
- About Huaqiu
